WatchGuard Firewall Integration Guide
integrations network watchguard firewall
WatchGuard firewalls should be configured to send logs via syslog to the Taegis™ XDR Collector from the Fireware Web UI or Policy Manager. Please follow the instructions in the documentation provided by WatchGuard to add syslog servers.
Connectivity Requirements ⫘
| Source | Destination | Port/Protocol |
|---|---|---|
| WatchGuard Firewall | XDR Collector (mgmt IP) | UDP/514 |
Data Provided from Integration ⫘
| Antivirus | Auth | DHCP | DNS | Encrypt | File | HTTP | Management | Netflow | NIDS | Process | Thirdparty | ||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| WatchGuard Firewall | Y | D | D | D |
Y = Normalized | D = Out-of-the-Box Detections | V = Vendor-Specific Detections
Note
XDR detectors are not guaranteed to be triggered, even if a data source's logs are normalized to a schema associated with a given detector. However, you can create Custom Alert Rules to generate alerts based on normalized data from a data source.
Configuration Instructions ⫘
To configure your WatchGuard firewall to send logs to Secureworks® Taegis™ XDR, follow the instructions provided by WatchGuard to add syslog servers in this article. Consider the following requirements when completing the configuration steps:
- IP Address — The IP address of the XDR Collector
- Port — 514
- Log Format -- Syslog
- Include time stamp — Check to include.
- Include serial number of the device — Check to include.
- Syslog Facility — Select according to your priorities.